| Type | (Cust.) Art. no. | d | SW | L | g | CAD | Legend | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Type | SO 56000-6/-6,35 | Art. no. | 058.6000.060 | d | 6.35 mm | SW | 11.0 mm | L | 36.0 mm | g | 37.0 | CAD | - | |
| Type | SO 56000-8 | Art. no. | 058.6000.080 | d | 8.0 mm | SW | 11.0 mm | L | 37.0 mm | g | 41.0 | CAD | - | |
| Type | SO 56000-10/-9,52 | Art. no. | 058.6000.100 | d | 10.0 mm | SW | 14.0 mm | L | 37.0 mm | g | 65.0 | CAD | - | |
| Type | SO 56000-12 | Art. no. | 058.6000.120 | d | 12.0 mm | SW | 14.0 mm | L | 37.0 mm | g | 70.0 | CAD | - | |
| Type | SO 56000-15/-12,7/-13,5/-14 | Art. no. | 058.6000.150 | d | 15.0 mm | SW | 17.0 mm | L | 40.0 mm | g | 101.0 | CAD | - | |
| Type | SO 56000-18/-16/-17,2 | Art. no. | 058.6000.180 | d | 18.0 mm | SW | 19.0 mm | L | 40.0 mm | g | 142.0 | CAD | - | |
| Type | SO 56000-22/-21,3 | Art. no. | 058.6000.220 | d | 22.0 mm | SW | 22.0 mm | L | 40.0 mm | g | 189.0 | CAD | - | |
| Type | SO 56000-28 | Art. no. | 058.6000.280 | d | 28.0 mm | SW | 27.0 mm | L | 46.0 mm | g | 347.0 | CAD | - | |
| Type | SO 56000-35 | Art. no. | 058.6000.350 | d | 35.0 mm | SW | 36.0 mm | L | 60.0 mm | g | 642.0 | CAD | - |
Pre-assembly stud
for stainless steel, brass M, aluminium unions
SO Code:
-
Art. no.: -
Technical details
Additional information
The pre-assembly stud is used for the pre-fitting of the nut connection.
Instructions:
Clamp the pre-assembly stud in a vise.
Screw on the nut connection.
Push the tube into the nut connection.
Tighten the union nut approx. 1 1/2 turns with an open ended spanner (mechanical stop).
Final assembly in the equipment approx. 1/4 turn.
Keep the flat metal surface clean.
Occasional lubrification of the thread and the flat metal surface facilitate pre-assembly.
Please refer to the installation instructions.
For automated pre-assembly see the devices SERTOtool/SERTOspeed in chapter 21.
Material: Steel 1.2312
Instructions:
Clamp the pre-assembly stud in a vise.
Screw on the nut connection.
Push the tube into the nut connection.
Tighten the union nut approx. 1 1/2 turns with an open ended spanner (mechanical stop).
Final assembly in the equipment approx. 1/4 turn.
Keep the flat metal surface clean.
Occasional lubrification of the thread and the flat metal surface facilitate pre-assembly.
Please refer to the installation instructions.
For automated pre-assembly see the devices SERTOtool/SERTOspeed in chapter 21.
Material: Steel 1.2312
Documents
-
Installation instructions brass / stainless steel / aluminium / steel Download
The pre-assembly stud is used for the pre-fitting of the nut connection.
Instructions:
Clamp the pre-assembly stud in a vise.
Screw on the nut connection.
Push the tube into the nut connection.
Tighten the union nut approx. 1 1/2 turns with an open ended spanner (mechanical stop).
Final assembly in the equipment approx. 1/4 turn.
Keep the flat metal surface clean.
Occasional lubrification of the thread and the flat metal surface facilitate pre-assembly.
Please refer to the installation instructions.
For automated pre-assembly see the devices SERTOtool/SERTOspeed in chapter 21.
Material: Steel 1.2312
Instructions:
Clamp the pre-assembly stud in a vise.
Screw on the nut connection.
Push the tube into the nut connection.
Tighten the union nut approx. 1 1/2 turns with an open ended spanner (mechanical stop).
Final assembly in the equipment approx. 1/4 turn.
Keep the flat metal surface clean.
Occasional lubrification of the thread and the flat metal surface facilitate pre-assembly.
Please refer to the installation instructions.
For automated pre-assembly see the devices SERTOtool/SERTOspeed in chapter 21.
Material: Steel 1.2312
Documents
-
Installation instructions brass / stainless steel / aluminium / steel Download